The polyurethane foam paint is presented as the final layer on the metal surfaces, epoxy primers and wooden surfaces in two parts. The polyurethane paint is very resistant to various atmospheric factors such as water, light, the sun, acid and alkaline environments, oils, fats, and chemical detergents and other corrosive agents. An important feature of polyurethane paints is the resistance and stability against ultraviolet rays of the sun. It also prevents chalking when used as the final layer on epoxy primers. This color is very useful in environments that are severely corrosive due to geographical circumstances or the problem of protecting a high sensitivity. The paint is used extensively in ports, ports, port structures, external walls of tanks and reservoirs, external platforms of seawater, structures and pipes, chemical industry, refineries, petrochemicals, power plants and nuclear facilities.
 

• instruction

1. Rinse the tools and tools carefully before use. Mix the components of the paint evenly with the mixer.
2. In accordance with the instructions installed on the colored packing containers, the first component (polyurethane paint) is gradually mixed with the second component (hardener) and completely dissolve. Then, after 30 minutes, add a special toner to the polyurethane paint, we use the paint. Note that after mixing the paint, hardener and epoxy thinner, at 20 ° C, the paint is ready, which should be used up to 8 hours.
3. The required level should be free of any dust, rust, grease and moisture.
4. All paints and tools should be washed off after use at the end of each working day.