Acrylic resins are divided into two groups of oil solvent base and water solvent. The properties of water-based acrylic resins can be characterized by faster drying and harder and more invasive surfaces. Acrylic colors are very versatile and flexible, they are also suitable for levels of high concentration and rapid drying to create tissue. Water based acrylic paints are a new generation of colors that are becoming increasingly popular with regard to environmental issues and the lack of organic solvents and harmful substances. It is gradually a substitute for alkyd-colored dyes. Solvent-based acrylic resin is also used to produce traffic colors. Traffic colors are commonly used to line the streets.

Advantages:

The percentage of harmful toxic substances present in acrylic paints is much less than that of solvent oils, and this is evident when the color runs out with the amount of smell that it finds itself, which disappears after a few hours.

After the job is completed, it is also necessary to rinse out appliances such as brush, rollers or spray gun.

Another point is that the water can easily be removed from the surface of the paint and there is no possibility of blasting or creating a hole during drying, like oil solvents.

It quickly dries and is easy to apply so that it can be painted several times a day and is fully ready after 2 hours, while the oily color needs several days to run.

For washing ability, acrylic colors can be completely washable and have high moisture resistance, which can also be used in bathroom and bathrooms, and do not cook in any way. Another feature is that it has a high resistance to ultraviolet UV rays, and the opposite of the oily colors that have been plastered for many years will never happen to them.
 

        1.Acrylic Paint

           Technical Specifications:

The color is based on acrylic thermosetting resins and is modified for properties and high quality with epoxy resin. This color is used for home-made metal surfaces such as home appliances, washing machines, dishwashers, refrigerators and so on, where hot water and water resistance are important. These colors are also resistant to food stains and also have good wear and tear. Over time, glossiness keeps the color well. The adhesion of these colors is good as the color of a layer on the phosphate metal surfaces, but it is customary to use this paint on the primer.

            Usage:

The STO 1 thinner is used for spraying conventional compressed air and STO 3 spray for electrostatic sprays. The above desiccants should be added in color to 25 to 30% by weight.

Burning cycle in the furnace after stopping the stained part for 15 minutes in the air (Flash time) inside the furnace at 140 ° C for 20 minutes and in a 160 ° C furnace for 10 minutes.

        2.Traffic color

            Technical Specifications:

 Traffic color base, blue solvent and traffic-based paint based on nano-polish solvent, thermoplastic traffic, one part based on acrylic thermoplastic resin, specially designed for Iran's weather conditions, and is designed to align on road pavements and roads and traffic signs that are on Asphalt is applied, it is used. Abrasion resistance, abrasion resistance and color stability are among the features of this series of colors, and have shown good results in terms of quality stability on Iran's asphalt compared to other single-colored traffic color systems.

           Usage:

With a U-T80 Series Traffic Tiner, it should be diluted 5 to 10% by weight and used by special cold-air blasting machines known in Iran as HOFFMAN machines. The film thickness of the film usually ranges from 300 to 400 microns It must be adjusted (experience has shown that a spray of 2 times over a period of 30 minutes and 400 millimeter thick each time).

At a temperature above 15 ° C, after an hour after spraying the paint on the asphalt, a road or a stained street could be opened for vehicle traffic. The hardness and durability of the paint is completed at temperatures above 15 ° C after 8 to 12 hours.